
48D4 Electronic Distributor - Side Entry Cap
Standard Road Use - Vacuum
Our advance curves are a great starting point and for many applications will be as close to perfect as possible. A full rolling road session will help to tailor your ignition to your vehicle.
Please see compatibility chart below
Please see our electronic distributor fitting guide and data sheet

Take Electronic Ignition one stage further with our Latest Signature Module - intelligent dwell control and heat management.
Our Lucas type 48D electronic distributor fits the later Austin / Morris 1700cc and 2000cc engines (see below for a compatibility list.
Our distributors offer the same performance with greater reliability at a more affordable price than other electronic packages on the market.
Developed and tested to replace the troublesome points system with modern magnetic pick-up electronic ignition to give the following benefits:
This unit comes complete and ready to fit to the vehicle with no external boxes, this unit is designed for the enthusiast to install.
Our products are manufactured to the highest standards with high quality internal components.
Complete with a 24 month warranty.
48D4 Application List
|
|
Benefits of our Electronic Distributors
|
|
Austin
Ambassador 1700cc, 2000cc
Princess 1700cc
1978 - 1984 Lucas 48D4 Anti-Clockwise
Morris
Ital 1700cc, 2000cc
Marina mk3 1700cc
1978 - 1984 Lucas 48D4 Anti-Clockwise
Leyland DAF
Sherpa 2000
• 1980 - 1984 Lucas 48D4 Anti-Clockwise
Please use this chart as a guide only, the distributor in your vehicle may have been replaced, if in doubt please ring through to our sales desk with the numbers from your distributor.
|
|
Improved performance
- Easier starting
- Up to 15% better fuel economy
- Improved ignition
- Improved fuel economy
- Easy PLUG & PLAY installation
- No adjustments needed
System Requirements
- 12v non Ballast Negative Earth
- Standard ignition coil with <1.5 Ohms resistance
- Only to be used with surpressed HT leads
Red wire connects to the positive connector on the coil, the Black connects to the negative
Warning:
Make sure not to reverse the RED and BLACK Ignition wires as this is likely to destroy the ignition module and void the warranty. Returned units are tested to identify the cause of failure.
Using a coil with too little primary resistance can cause the ignition module to overheat and fail also voiding the warranty. Please contact a member of our team if you are unsure of any details. All ignition products supplied by A-Series Spares come with a 2 year manufacturers warranty.
|
For further information, please email sales@aseriesspares.co.uk
Alternatively call our sales team free on 0800 8 247 294